Spring Boot + Redis 实现分布式锁,还有谁不会?

开发 架构
使用 Redis 作为分布式锁,将锁的状态放到 Redis 统一维护,解决集群中单机 JVM 信息不互通的问题,规定操作顺序,保护用户的数据正确。

一、业务背景

有些业务请求,属于耗时操作,需要加锁,防止后续的并发操作,同时对数据库的数据进行操作,需要避免对之前的业务造成影响。

二、分析流程

使用 Redis 作为分布式锁,将锁的状态放到 Redis 统一维护,解决集群中单机 JVM 信息不互通的问题,规定操作顺序,保护用户的数据正确。

梳理设计流程

新建注解 @interface,在注解里设定入参标志

增加 AOP 切点,扫描特定注解

建立 @Aspect 切面任务,注册 bean 和拦截特定方法

特定方法参数 ProceedingJoinPoint,对方法 pjp.proceed() 前后进行拦截

切点前进行加锁,任务执行后进行删除 key

核心步骤:加锁、解锁和续时

使用了 RedisTemplate 的 opsForValue.setIfAbsent 方法,判断是否有 key,设定一个随机数 UUID.random().toString,生成一个随机数作为 value。

从 redis 中获取锁之后,对 key 设定 expire 失效时间,到期后自动释放锁。

按照这种设计,只有第一个成功设定 Key 的请求,才能进行后续的数据操作,后续其它请求由于无法获得🔐资源,将会失败结束。

超时问题

担心 pjp.proceed() 切点执行的方法太耗时,导致 Redis 中的 key 由于超时提前释放了。

例如,线程 A 先获取锁,proceed 方法耗时,超过了锁超时时间,到期释放了锁,这时另一个线程 B 成功获取 Redis 锁,两个线程同时对同一批数据进行操作,导致数据不准确。

解决方案:增加一个「续时」

任务不完成,锁不释放:

维护了一个定时线程池 ScheduledExecutorService,每隔 2s 去扫描加入队列中的 Task,判断是否失效时间是否快到了,公式为:【失效时间】<= 【当前时间】+【失效间隔(三分之一超时)】

/**
* 线程池,每个 JVM 使用一个线程去维护 keyAliveTime,定时执行 runnable
*/
private static final ScheduledExecutorService SCHEDULER =
new ScheduledThreadPoolExecutor(1,
new BasicThreadFactory.Builder().namingPattern("redisLock-schedule-pool").daemon(true).build());
static {
SCHEDULER.scheduleAtFixedRate(() -> {
// do something to extend time
}, 0, 2, TimeUnit.SECONDS);
}

三、设计方案

经过上面的分析,同事小🐟设计出了这个方案:

图片

前面已经说了整体流程,这里强调一下几个核心步骤:

  • 拦截注解 @RedisLock,获取必要的参数
  • 加锁操作
  • 续时操作
  • 结束业务,释放锁

四、实操

之前也有整理过 AOP 使用方法,可以参考一下。

相关属性类配置

业务属性枚举设定

public enum RedisLockTypeEnum {
/**
* 自定义 key 前缀
*/
ONE("Business1", "Test1"),

TWO("Business2", "Test2");
private String code;
private String desc;
RedisLockTypeEnum(String code, String desc) {
this.code = code;
this.desc = desc;
}
public String getCode() {
return code;
}
public String getDesc() {
return desc;
}
public String getUniqueKey(String key) {
return String.format("%s:%s", this.getCode(), key);
}
}

任务队列保存参数

public class RedisLockDefinitionHolder {
/**
* 业务唯一 key
*/
private String businessKey;
/**
* 加锁时间 (秒 s)
*/
private Long lockTime;
/**
* 上次更新时间(ms)
*/
private Long lastModifyTime;
/**
* 保存当前线程
*/
private Thread currentTread;
/**
* 总共尝试次数
*/
private int tryCount;
/**
* 当前尝试次数
*/
private int currentCount;
/**
* 更新的时间周期(毫秒),公式 = 加锁时间(转成毫秒) / 3
*/
private Long modifyPeriod;
public RedisLockDefinitionHolder(String businessKey, Long lockTime, Long lastModifyTime, Thread currentTread, int tryCount) {
this.businessKey = businessKey;
this.lockTime = lockTime;
this.lastModifyTime = lastModifyTime;
this.currentTread = currentTread;
this.tryCount = tryCount;
this.modifyPeriod = lockTime * 1000 / 3;
}
}

设定被拦截的注解名字

@Retention(RetentionPolicy.RUNTIME)
@Target({ElementType.METHOD, ElementType.TYPE})
public @interface RedisLockAnnotation {
/**
* 特定参数识别,默认取第 0 个下标
*/
int lockFiled() default 0;
/**
* 超时重试次数
*/
int tryCount() default 3;
/**
* 自定义加锁类型
*/
RedisLockTypeEnum typeEnum();
/**
* 释放时间,秒 s 单位
*/
long lockTime() default 30;
}

核心切面拦截的操作

RedisLockAspect.java 该类分成三部分来描述具体作用

Pointcut 设定

/**
* @annotation 中的路径表示拦截特定注解
*/
@Pointcut("@annotation(cn.sevenyuan.demo.aop.lock.RedisLockAnnotation)")
public void redisLockPC() {
}

Around 前后进行加锁和释放锁

前面步骤定义了我们想要拦截的切点,下一步就是在切点前后做一些自定义操作:

@Around(value = "redisLockPC()")
public Object around(ProceedingJoinPoint pjp) throws Throwable {
// 解析参数
Method method = resolveMethod(pjp);
RedisLockAnnotation annotation = method.getAnnotation(RedisLockAnnotation.class);
RedisLockTypeEnum typeEnum = annotation.typeEnum();
Object[] params = pjp.getArgs();
String ukString = params[annotation.lockFiled()].toString();
// 省略很多参数校验和判空
String businessKey = typeEnum.getUniqueKey(ukString);
String uniqueValue = UUID.randomUUID().toString();
// 加锁
Object result = null;
try {
boolean isSuccess = redisTemplate.opsForValue().setIfAbsent(businessKey, uniqueValue);
if (!isSuccess) {
throw new Exception("You can't do it,because another has get the lock =-=");
}
redisTemplate.expire(businessKey, annotation.lockTime(), TimeUnit.SECONDS);
Thread currentThread = Thread.currentThread();
// 将本次 Task 信息加入「延时」队列中
holderList.add(new RedisLockDefinitionHolder(businessKey, annotation.lockTime(), System.currentTimeMillis(),
currentThread, annotation.tryCount()));
// 执行业务操作
result = pjp.proceed();
// 线程被中断,抛出异常,中断此次请求
if (currentThread.isInterrupted()) {
throw new InterruptedException("You had been interrupted =-=");
}
} catch (InterruptedException e ) {
log.error("Interrupt exception, rollback transaction", e);
throw new Exception("Interrupt exception, please send request again");
} catch (Exception e) {
log.error("has some error, please check again", e);
} finally {
// 请求结束后,强制删掉 key,释放锁
redisTemplate.delete(businessKey);
log.info("release the lock, businessKey is [" + businessKey + "]");
}
return result;
}

上述流程简单总结一下:

  • 解析注解参数,获取注解值和方法上的参数值
  • redis 加锁并且设置超时时间
  • 将本次 Task 信息加入「延时」队列中,进行续时,方式提前释放锁
  • 加了一个线程中断标志
  • 结束请求,finally 中释放锁

续时操作

这里用了 ScheduledExecutorService,维护了一个线程,不断对任务队列中的任务进行判断和延长超时时间:

// 扫描的任务队列
private static ConcurrentLinkedQueue<RedisLockDefinitionHolder> holderList = new ConcurrentLinkedQueue();
/**
* 线程池,维护keyAliveTime
*/
private static final ScheduledExecutorService SCHEDULER = new ScheduledThreadPoolExecutor(1,
new BasicThreadFactory.Builder().namingPattern("redisLock-schedule-pool").daemon(true).build());
{
// 两秒执行一次「续时」操作
SCHEDULER.scheduleAtFixedRate(() -> {
// 这里记得加 try-catch,否者报错后定时任务将不会再执行=-=
Iterator<RedisLockDefinitionHolder> iterator = holderList.iterator();
while (iterator.hasNext()) {
RedisLockDefinitionHolder holder = iterator.next();
// 判空
if (holder == null) {
iterator.remove();
continue;
}
// 判断 key 是否还有效,无效的话进行移除
if (redisTemplate.opsForValue().get(holder.getBusinessKey()) == null) {
iterator.remove();
continue;
}
// 超时重试次数,超过时给线程设定中断
if (holder.getCurrentCount() > holder.getTryCount()) {
holder.getCurrentTread().interrupt();
iterator.remove();
continue;
}
// 判断是否进入最后三分之一时间
long curTime = System.currentTimeMillis();
boolean shouldExtend = (holder.getLastModifyTime() + holder.getModifyPeriod()) <= curTime;
if (shouldExtend) {
holder.setLastModifyTime(curTime);
redisTemplate.expire(holder.getBusinessKey(), holder.getLockTime(), TimeUnit.SECONDS);
log.info("businessKey : [" + holder.getBusinessKey() + "], try count : " + holder.getCurrentCount());
holder.setCurrentCount(holder.getCurrentCount() + 1);
}
}
}, 0, 2, TimeUnit.SECONDS);
}

这段代码,用来实现设计图中虚线框的思想,避免一个请求十分耗时,导致提前释放了锁。

这里加了「线程中断」Thread#interrupt,希望超过重试次数后,能让线程中断(未经严谨测试,仅供参考哈哈哈哈)

不过建议如果遇到这么耗时的请求,还是能够从根源上查找,分析耗时路径,进行业务优化或其它处理,避免这些耗时操作。

所以记得多打点 Log,分析问题时可以更快一点。如何使用SpringBoot AOP 记录操作日志、异常日志?

五、开始测试

在一个入口方法中,使用该注解,然后在业务中模拟耗时请求,使用了 Thread#sleep

@GetMapping("/testRedisLock")
@RedisLockAnnotation(typeEnum = RedisLockTypeEnum.ONE, lockTime = 3)
public Book testRedisLock(@RequestParam("userId") Long userId) {
try {
log.info("睡眠执行前");
Thread.sleep(10000);
log.info("睡眠执行后");
} catch (Exception e) {
// log error
log.info("has some error", e);
}
return null;
}

使用时,在方法上添加该注解,然后设定相应参数即可,根据 typeEnum 可以区分多种业务,限制该业务被同时操作。

测试结果:

2020-04-04 14:55:50.864  INFO 9326 --- [nio-8081-exec-1] c.s.demo.controller.BookController       : 睡眠执行前
2020-04-04 14:55:52.855 INFO 9326 --- [k-schedule-pool] c.s.demo.aop.lock.RedisLockAspect : businessKey : [Business1:1024], try count : 0
2020-04-04 14:55:54.851 INFO 9326 --- [k-schedule-pool] c.s.demo.aop.lock.RedisLockAspect : businessKey : [Business1:1024], try count : 1
2020-04-04 14:55:56.851 INFO 9326 --- [k-schedule-pool] c.s.demo.aop.lock.RedisLockAspect : businessKey : [Business1:1024], try count : 2
2020-04-04 14:55:58.852 INFO 9326 --- [k-schedule-pool] c.s.demo.aop.lock.RedisLockAspect : businessKey : [Business1:1024], try count : 3
2020-04-04 14:56:00.857 INFO 9326 --- [nio-8081-exec-1] c.s.demo.controller.BookController : has some error
java.lang.InterruptedException: sleep interrupted
at java.lang.Thread.sleep(Native Method) [na:1.8.0_221]

我这里测试的是重试次数过多,失败的场景,如果减少睡眠时间,就能让业务正常执行。

如果同时请求,你将会发现以下错误信息:

图片

表示我们的锁🔐的确生效了,避免了重复请求。

六、总结

对于耗时业务和核心数据,不能让重复的请求同时操作数据,避免数据的不正确,所以要使用分布式锁来对它们进行保护。

再来梳理一下设计流程:

  • 新建注解 @interface,在注解里设定入参标志
  • 增加 AOP 切点,扫描特定注解
  • 建立 @Aspect 切面任务,注册 bean 和拦截特定方法
  • 特定方法参数 ProceedingJoinPoint,对方法 pjp.proceed() 前后进行拦截
  • 切点前进行加锁,任务执行后进行删除 key

本次学习是通过 Review 小伙伴的代码设计,从中了解分布式锁的具体实现,仿照他的设计,重新写了一份简化版的业务处理。对于之前没考虑到的「续时」操作,这里使用了守护线程来定时判断和延长超时时间,避免了锁提前释放。

于是乎,同时回顾了三个知识点:

1、AOP 的实现和常用方法

2、定时线程池 ScheduledExecutorService 的使用和参数含义

3、线程 Thread#interrupt 的含义以及用法(这个挺有意思的,可以深入再学习一下)

责任编辑:武晓燕 来源: 江南一点雨
相关推荐

2020-07-15 16:50:57

Spring BootRedisJava

2022-03-16 11:11:37

SpringBean项目

2021-01-05 09:25:35

SQL优化查询

2024-01-30 08:41:33

线程执行Redis分布式锁

2022-09-22 13:28:34

Redis分布式锁

2022-09-29 08:28:57

SpringRedis分布式

2022-01-06 10:58:07

Redis数据分布式锁

2023-08-21 19:10:34

Redis分布式

2019-02-26 09:51:52

分布式锁RedisZookeeper

2019-06-19 15:40:06

分布式锁RedisJava

2020-07-30 09:35:09

Redis分布式锁数据库

2023-03-01 08:07:51

2023-01-13 07:39:07

2019-12-25 14:35:33

分布式架构系统

2023-10-11 09:37:54

Redis分布式系统

2021-10-25 10:21:59

ZK分布式锁ZooKeeper

2021-10-25 09:50:57

Redis分布式技术

2021-10-26 00:38:10

Redis分布式

2020-11-16 12:55:41

Redis分布式锁Zookeeper

2022-09-19 08:17:09

Redis分布式
点赞
收藏

51CTO技术栈公众号